Have a 97 f250 with a 7.3 . Shortly after adding some questionable fuel the truck stalled. First time trying to restart it sounded promising, but nothing. I've done some testing and seaching
I put 911 in tank n drained filter housing.
Put in new filter n 911 in housing.
have great pressure at shraeder valve
Hi pressure oil pump is full
No oil out of side of injector
wont start with icp off
will run on starting fluid ( I know I know)
all fuse good
batteries are great and have been on charge to prevent from draining
Really in a pinch, don't have money to be shooting in the dark.
I am very mechanical, but have limited 7.3 experience
your injectors are not turnign on for some reason, either its not told to turn on or IPR failed, you need a mech pressure gauge, if it reads over 500psi then the injectors are not told to turn on.
This is an older thread, you may not receive a response, and could
be reviving an old thread. Please consider creating a new thread.
The Diesel Stop
A forum community dedicated to all Ford Diesel owners and enthusiasts. Come join the discussion about PowerStrokes, performance, modifications, troubleshooting, towing capacity, maintenance, and more!