The Diesel Stop banner

Anti-Lock light flashing a code....

1546 Views 9 Replies 7 Participants Last post by  action4478
Hey all, got another question for you that have maybe had the same thing happen or just now what it Today I was driving in town, went to stop at a stop light and the Anti-lock brake light started flashing what looked like a code...flashed (13)times I think it was and then solid burn. I had a to go to HD and when I started the truck to leave the light was no longer flashing or burning, untill the first stop light. I still had some running to do, so I tried to pay attention to it. I did notice I blew a fuse for turn signals and such (pulled trailer last night and plug came apart when I unplugged it) so I replaced the fuse thinking maybe it had something to do with the light.
On the way home it did not burn again untill the brakes were applied, but I did notice that a light braking did not turn it on. The light only came on when the brakes were applied with some pressure, nothing real hard but more than a feather touch. Light goes out every time when the truck is shut off untill that first stop, then burns untill key is shut off.
If anyone knows if it a sensor or what, I would appreciate it so i can fix it!! thanks
1 - 1 of 10 Posts
Brakes still feel same as before...fine. The pedal is not spongy or stiff, just feels like it should.

[/ QUOTE ]

Well, the "Brake" Light coming on is for the parking brake engaged, low fluid, or low vacumn pressure.

The "Antilock" ABS Light coming on means a fault in the antilock brake system and the system has been disabled.

If the abs fuse and brake lights are good, something else is wrong.
1 - 1 of 10 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.