The Diesel Stop banner

Anti-Lock light flashing a code....

1550 Views 9 Replies 7 Participants Last post by  action4478
Hey all, got another question for you that have maybe had the same thing happen or just now what it Today I was driving in town, went to stop at a stop light and the Anti-lock brake light started flashing what looked like a code...flashed (13)times I think it was and then solid burn. I had a to go to HD and when I started the truck to leave the light was no longer flashing or burning, untill the first stop light. I still had some running to do, so I tried to pay attention to it. I did notice I blew a fuse for turn signals and such (pulled trailer last night and plug came apart when I unplugged it) so I replaced the fuse thinking maybe it had something to do with the light.
On the way home it did not burn again untill the brakes were applied, but I did notice that a light braking did not turn it on. The light only came on when the brakes were applied with some pressure, nothing real hard but more than a feather touch. Light goes out every time when the truck is shut off untill that first stop, then burns untill key is shut off.
If anyone knows if it a sensor or what, I would appreciate it so i can fix it!! thanks
1 - 4 of 10 Posts
Brakes still feel same as before...fine. The pedal is not spongy or stiff, just feels like it should.
Its not the "brake" light, it is the ABS light and the fluid levels are good as is all the fuses. When I replaced my fuse for turn signals I checked all others and found no more bad.Guess no one has had a code flashed by the abs light before..figure its a bad sensor at the rear end, but I wanted to see if anyone had any experience with this before.
Yes, it does still do the same thing even after replacing the fuse.Everything works fine, just that annoying light flashing....
1 - 4 of 10 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.