[NCHornet]

The hardest part is getting those darn retainers out!!! Get a real skinny screwdriver and simply pry the fingers out and then use a needle nose vice grip to pull straight up. Replacing is pretty straight forward, before you start park about 30-50 ft from a wall and mark where the main beam is located, just use duct tape or something and also mark the ground where the wheels were, then when you get done park in the same spot and adjust as needed. You will love the increased light output especially if you invest in the upgraded wiring harness from GOSRacing.

 

[NCHornet]

I installed mine at the same time I installed the 03 clear lights so not sure if it was just the clear housings/ harness or both of them together but I got a lot more light now. I was going to buy new bulbs but figured I would just wait until these burn out, heck there almost 8 years old it shouldn't be long!!!