The Diesel Stop banner

auto trans??

1029 Views 3 Replies 3 Participants Last post by  Mark Kovalsky
will an auto trans out of an 85 with a 6.9 mate up to a 94 with and IDI 7.3? if i'm right you just have to change the bell housing over correct?
1 - 1 of 4 Posts
It is just as posted above but... The C6 is controled by a vacuum signal from the VVS valve on the injection pump. The 94 auto trans is the E4OD and is all electric controled. It gets several signals from differant switches. You can bolt the C6 to a 7.3 but vacuum tubing needs to be run to make it shift from the injection upmp to the trans.
1 - 1 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.