Pete, min has all torx bolts too, smaller for the FIPL than those for the FIPL bracket, but still all torx. My bracket bolts are also stripped, so I just wiggle the FIPL and it seems to work good.
Bad day adjusting TPS on IP
Well it all started with trying to figure why my Tc keeps locking and unlocking constantly at highway speeds. I posted on here and got some great info:thumbsup:. Found out my Tps was out of spec. Supposed to be 1.1v at engine warm curb idle engine off key on. Found out that I only have .6v at idle and 3.9 wot. Okay no big deal just need loosen the torx screws and adjust. Well come to find out the PO must have tried this and stripped the torx screw heads on the sensor and the bigger ones on the pump:thdown:. Tryed getting a vice grips to grip but that doesn't work. Now I am faced with either grinding the heads of all four scews and hope they come out or pulling the pump so I have better acess. The two going into the aluminum hosing scare me though and I dont want to snap them off. Anybody ever have this problem, or any ideas. I am at wits end with this truck.:icon_mad:
1 - 1 of 8 Posts
1 - 1 of 8 Posts
- This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
The Diesel Stop
A forum community dedicated to all Ford Diesel owners and enthusiasts. Come join the discussion about PowerStrokes, performance, modifications, troubleshooting, towing capacity, maintenance, and more!
Full Forum Listing
