The Diesel Stop banner

Blackstone Report ---Fuel Contamination

905 Views 2 Replies 3 Participants Last post by  klhansen
I have a 7.3 with 117,000 miles. To date never had a problem with this Truck. Did my first Blackstone report at 60,000 miles, all elements were below average except Iron (34). All reports since have been the same, the only thing above average is Iron. My last 2 back to back reports showed Fuel contamination with a below average flashpoint (400). The Fuel % average is <2.0 , mine checked 1.0. If I am reading this correctly how can I have Fuel contamination(low flashpoint) and be below average for Fuel %. 3 months ago I switched from a 55 hp chip to an Edge Evolution and shimmed the regulator (55psi to 68psi). Could these changes be causing this or do I really not have a problem. Oil change every 5300 w/ Rotella T 15-40. Sorry for the long post.
Thanks, Robbie
1 - 1 of 3 Posts
1 - 1 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top