The Diesel Stop banner

Cam Positioning Sensor

1075 Views 3 Replies 4 Participants Last post by  NCHornet
Need some help finding information on changing the CPS of my 01 F250.
1 - 1 of 4 Posts
Super easy.

You need a 10mm socket and ratchet. The CPS is located on the front of the engine just above and to the left of the crank pully. It's easier to access from underneath the truck. Unplug the electrical connector and unbolt the single 10mm bolt holding it in. Once the bolt is out the old CPS slides out, sometimes needing a bit of wiggling force. Just make sure the o-ring comes out with it. Pop the new one in, bolt it up, and plug the electrical connector in.

1 - 1 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.