[DIESELFREAK77]

My pedal has gotten soft and disengages very low to the floor. I looked into the Clutch Master Cylinder and there was no fluid. How much fluid should be in there?

 

[F350_6]

Fill the reservoir to the step. Then pull the slave out of the bell housing and look for any signs of leaks. When my reservoir went empty, it was because of a slow leak at the slave.

 

[DIESELFREAK77]

That's kinda what I'm thinking cause the bell housing is wet.

 

[DIESELFREAK77]

F350 that's what it was. I had my suspicions but just wanted to throw it up here for a second opinion.