The Diesel Stop banner

Crank no start after E-Fuel install

3K views 1 reply 1 participant last post by  WillyD 
#1 ·
Recently installed a Marty's Diesel 875 kit which is a fuel bowl/pump delete and electric pump addition. Everything is back together with good fuel pressure and no leaks, but now it just cranks and won't start. Any suggestions would be appreciated. Thanks.
 
#2 ·
In case anyone else has a crank/no start situation, mine ended up being a loose IPR sensor. Truck is running real smooth with an increase in performance with the electric fuel. Good upgrade.
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top