The Diesel Stop banner
1 - 6 of 6 Posts

· Registered
Joined
·
39 Posts
Discussion Starter · #1 ·
I have a 1993 F350 IDI 7.3L Diesel 4x4, hunting for an auto tranny. From what year to what year will one fit without mods?
Thanks
 

· Registered
Joined
·
3,541 Posts
92 to 99 99.5 went to the 4R100
 
  • Like
Reactions: Heavy_Horse

· Super Moderator
Joined
·
9,150 Posts
All 1999 were 4R100.

The only ones that will fit with NO modifications is 1989-1994. In 1995 when the Powerstroke was introduced the torque converter was changed to six studs from four studs.
 
  • Like
Reactions: Heavy_Horse

· Registered
Joined
·
106 Posts
There were quite a number of internal upgrades in the 1995 model. Have no idea what issues you would encounter if you tried to use that year model.
 
  • Like
Reactions: Heavy_Horse

· Registered
Joined
·
39 Posts
Discussion Starter · #5 ·
Thank you very much guys. Now to find a good low mileage one. :smile2:
 

· Super Moderator
Joined
·
9,150 Posts
There were quite a number of internal upgrades in the 1995 model. Have no idea what issues you would encounter if you tried to use that year model.
You would have to swap either the flex plate or the torque converter.

The electronics also changed in 1995, so you'd need to swap the solenoid body and the range sensor. None of that is difficult.
 
  • Like
Reactions: gab16
1 - 6 of 6 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top