[Jgt236]

Hi guys I'm trying to get to my IPR and ICP sensors. I can't seem to find the right walk through or Video for my application. I have the specialty socket for the IPR but the intake manifold seems to be in the way. Do i have to remove the intake manifold? Really any help would be much appreciated. Here is a picture of how far I've gotten so far trying to get to the IPR.

 

[frostyshadow]

Here you

...

 

[frostyshadow]

Dieseltechron has a video about removing the IPR on the 03 and does it with an extension used from the bottom side above the bellhousing.

 

[ford_doctor]

The fact the engine is a 2003 it has the crossover in the rear of the intake manifold. I always remove the FICM and the rear FICM bracket and get the ICP sensor or IPR valve from the side using a universal and an extension... or you could remove the intake manifold.

 

[Jgt236]

Thanx guys, going to work on it today see if I can get any where!

 

[Thomas_60_Powestroke]

Thanx guys, going to work on it today see if I can get any where!

What did you do to get the IPR out? Same issue here—- stuck