The Diesel Stop banner

F350 ride height

1884 Views 2 Replies 3 Participants Last post by  desertwheeler
Hey folks, I have a little dilemma

I want my pickup to sit as high as a 1 ton but swapping in a D60 isn't in the cards (or the budget) right now. I just rebuilt the whole front end of this thing last summer and I can't justify 1200 for the D60 plus all the parts to replace the wear parts before putting the damn thing in (I estimated 2 grand for it).

I was thinking of doing an entire re-bush to replace all the worn TTB bushings and maybe adding a third leaf in the front. For the rear I was thinking of putting a set of 1-ton blocks.

Will this work? I thought of just selling this truck and buying a 95-97 1 ton but I finally have this thing paid off and it runs awesome. I'd rather not buy someone elses problems if I can help it.

1 - 1 of 3 Posts
i dont think it would work with the TTB the springs might be too soft. But no body has tried SD spring with the TTB though.
1 - 1 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.