The Diesel Stop banner
1 - 5 of 5 Posts

· Registered
Joined
·
477 Posts
Discussion Starter · #1 ·
What kind if any additives do you use in your PSD's? I never read anything about you guys mentioning it at all. sometime i use that power service stuff. any openions?

wayne
 

· Registered
Joined
·
879 Posts
I think you'll find that many on here either use Power Service or Stanadyne or nothing at all. The two I mentioned both seem to work well and I have even heard Ford techs reccomending both. They also sell Power Service at my International dealer so that may say something for the product.
 

· Registered
Joined
·
123 Posts
For what its worth... I use Stanadyne mixed with 2 stroke 50/50 and 4oz. per tank on fill up and I run them almost empty... Works for me and quieted down the motor big time and I average 16-18 mpg empty and 9-10 when towing(see sig for the cause of the 19,500 load) anyway it works for me.... I used a mix with ATF for a while but found better results with the 2 cycle...
 

· Registered
Joined
·
129 Posts
I use Power Service silver bottle. One ounce of additive per gallon of fuel. I know that is way more than recommended, but feel confident that there is a good tank of fuel in my truck.
 
1 - 5 of 5 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top