The Diesel Stop banner

Fuel Pressure Sensor help

3081 Views 3 Replies 3 Participants Last post by  dceng3inefd
I just had the ICP regulator replaced, "FP" was 46psi according to the shop (the first time my baby has ever been in any other shop than my own). I am wanting to do the "blue spring" upgrade, but want to install a FP gauge. What are some suggestions as far as brand, digital, analog, and where to install the sensor.
1 - 1 of 4 Posts
Connect the gauge to the regulator test port. You need a hose and gauge with a sending unit the hose and gauge are sold separately. gauge type would be your preference with a 100psi reading you can see the test port here Page 30: Fuel Supply System
1 - 1 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.