The Diesel Stop banner

Gauge install

1059 Views 5 Replies 3 Participants Last post by  gwalls
I am adding a fuel & oil presure, and water temp gauges. Where is the best place to make place the senders? Fuel I belive the front of the filter housing has a test port, but the others I have no idea. Pics are worth a thousand words.

1 - 1 of 6 Posts
Got trans guage problem fixed. Loose ground at guage.

But why is my pyro readings so low. Mounted before turbo and only hits about 700 with pedal buried to about 85. Runs about 500 at 65 on level ground no load. Seems slower to react than my previous guages. Check all connections and everything looks good.
1 - 1 of 6 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.