The Diesel Stop banner
1 - 5 of 5 Posts

· Registered
Joined
·
184 Posts
Discussion Starter · #1 ·
i was wanting some input on some upgrades this is what i have so far .
97 f250 crew cab automatic 117,000
dana 60 w/ 4in lift
ts 4bank chip
custom cold air intake
i am thinking about a good trans maybe bts or a bd . also some stage 1 injectors . i already have a 2000 intercooler i just need to buy the gts kit . i plan on building some 5in exhuast for it . iam going to install NV a.m. guages when i do the upgrades . i would like to know what others are running . thanks for the help Andy .
 

· Registered
Joined
·
1,534 Posts
The '97 has a TS 4 position chip, 6637 intake filter, CCV housing removed. 3" DP, 5" stacks. as far as I know stock trans without any mods. /ubbthreads/images/graemlins/shrug.gif

the '96 has a DP-Tuner PCM, Sonix valve and tri springs in trans, same intake and exhaust as the '97.

future wallet allowed mods, BTS trans and DIY injectors for the '97.
the '96 is another story....

Isspro gauges in both. pyro, boost, trans and water temp. 4x4 and 4:10 gears, stock suspention with the addition of an add-aleaf in both.

Diesel Rod
 

· Registered
Joined
·
277 Posts
sounds like you're on the right track. im at about the same point. i got a BTS trans on monday, and now im looking for horsepower. you can do it either way, injectors first, blow up the tranny, and then get a good one; or get a good tranny first, and not have to worry about it.

now i need to install my intercooler, get some stage II's, a SD pump, and a Wildman chip to start off. then later on down the road a fuel system, some big oil, and an H2E. i cant wait. -marty
 

· Registered
Joined
·
184 Posts
Discussion Starter · #4 ·
just wondering what the going price cash and carry on a bts . i been doing some research does anybody have a NADP 450 series . the reason i ask is they are about 3600.00 shipped . let me know thanks andy
 

· Registered
Joined
·
277 Posts
[ QUOTE ]
just wondering what the going price cash and carry on a bts . i been doing some research does anybody have a NADP 450 series . the reason i ask is they are about 3600.00 shipped . let me know thanks andy

[/ QUOTE ]

$3900 installed plus tax, and $120 for shaffers synthetic ATF. also, you get tons of information for free. i really learned a lot spending the day with those guys. -marty
 
1 - 5 of 5 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top