Joined
·
2,414 Posts
Look at the fuse block.

Pull the motor out & see if it spins smoothly by hand. Wash & brush all the dust & lint off the wheel, and shoot some oil into the motor so it can soak into the bearing at one end for a few hours, then flip it & do the other. While it's out, vacuum out the evaporator fins & the resistor.
. 

Pull the motor out & see if it spins smoothly by hand. Wash & brush all the dust & lint off the wheel, and shoot some oil into the motor so it can soak into the bearing at one end for a few hours, then flip it & do the other. While it's out, vacuum out the evaporator fins & the resistor.

