Joined
·
8 Posts
My experience
Replaced my ICP yesterday. Removed all parts listed in the begining of this thread. I purchased a 1/2" drive 1 1/8" deep well socket from Auto Zone (Cheap since I was going to weld on it) put a swivel on the socket and a 12" extension with a ratchet and took it right off. I was planning to do the cutting and welding of a handle onto the socket but on my early 04 I didn't need to. It was alot easier than I expected. Now my problem is trying to get the IPR out.:flame:
Replaced my ICP yesterday. Removed all parts listed in the begining of this thread. I purchased a 1/2" drive 1 1/8" deep well socket from Auto Zone (Cheap since I was going to weld on it) put a swivel on the socket and a 12" extension with a ratchet and took it right off. I was planning to do the cutting and welding of a handle onto the socket but on my early 04 I didn't need to. It was alot easier than I expected. Now my problem is trying to get the IPR out.:flame:
