How to tell a diesel ZF 5

1033 Views 7 Replies 4 Participants Last post by diesel_brad, Jan 23, 2009

diesel_brad

Discussion Starter · Jan 21, 2009

does anyone know how to tell a diesel zf from a gasser? Is there a different part number on the tag or some distinct feature that i can look at? Or does some one have measurements on the bellhousing bolt pattern ?

thanks

Save

1 - 1 of 8 Posts

MarkEkberg

· #2 · Jan 21, 2009

Only way I know how is the gasser versions have a taller 1st gear.

1996 F-250 extended cab long box five speed. Home made Tymar, 203 Stat, 60 gal in bed fuel cell, 315/75's, no muffler, ebpv welded open 3" to 3" DP, Babies. 290K, still chugging, and still smoking when cold.

UPDATED 1/1/09 Replace so far. 1 LUK flywheel+clutch, 2 thermostats, 2 set of brakes, 1 set of calipers, 5 CPS, 3 sets of tires, 2 Transfer pumps, 1 Injector modual, 1 Computer, 2 Alt, 2 sets of batteries, 1 Water pump, 6 Belts, 1 PS hose, 2 Sets ball joints, 2 set u-joints, 2 carrier bearing, 2 Speed sensors, 1 oil pres sender, 1 temp sender, 4 sets of e-break cables, 1 front fuel tank, 2 rear fuel tanks, 2 set of glow plugs, 7 Glow plug relays, Oil galley o-rings, Turbo pedistal o-rings, EBPV o-rings, 3 sets of Injector O-rings, 1 Vac-pump, 1 new carpet, 1 total paint job.Total $$$ in repairs v/s miles driven = 4.6 cents per mile. Add fuel to that it jumps to 16.5 cents per mile over the life of the truck.

Save

1 - 1 of 8 Posts

This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.

Top Contributors this Month