The Diesel Stop banner
1 - 3 of 3 Posts

· Registered
Joined
·
324 Posts
Discussion Starter · #1 ·
I want to be able to burn my WMO from my 97. Maybe 3 gal per month at 5%. I am looking for a inexpensive way to do this. I thought maybe run it through two or three 1 or 2 micron socks. Will this get it clean enough? Maybe later I will try WVO and on a greater level.

tgorsuch
 

· Registered
Joined
·
32 Posts
If you are only doing a gallon here and there strait in a full tank of diesel will work fine.

Also, the best (easiest) method of "filtering" is not to filter at all, set it aside for a month (at room temperature) then just pour off the top. When you get to the sediment, stop and discard.

This works for WVO and WMO is not much different. I would probably get a hold of a 1micron filter bag and pour it through as a final check to confirm that the bad stuff has settled out.

I make centrifuges that do this at speed but only a consideration once you are dealing with hundreds of gallons or more...

Leon
WVO Designs
 

· Registered
Joined
·
324 Posts
Discussion Starter · #3 ·
Thanks for your help! I think I am going to go with the socks but first I have some oil setting for a couple months I'll do as you suggested and see how well it settled.
 
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top