The Diesel Stop banner

Injection Control Pressure ICP Sensor

3892 Views 5 Replies 3 Participants Last post by  Excavator
Any body know where I locate the ICP Sensor on a 1997 F350 Powerstroke? I looked but can't seem to see it and I was told my truck needs a new one.

1 - 2 of 6 Posts
It could just be EBV exhaust backpressure valve and that is how they work when cold
Many of us just unplug the EBV. There is a plug connector just under turbo near drivers side valve cover. You can unplug it and see if it is better.
You can also see if the valve moves freely by pusshing the arm back and forth on turbo. Yours might be sticking
1 - 2 of 6 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.