I just changed the fuel filter the other day on my "99 F250, and now I am getting a dripping from the drain tube. I have tried several different suggestions to openinf and closing the valve, and there is no change. After about 1 minute of ru time the drip begins again.
I know I read somewhere to change the o rings in the valve, but can not find that info, and I am not sure how to change them.
Does the whole bowl have to be removed?
Anyone have any ideas?
While you're at it, you might want to put a piece of fuel line on the drain tube next to the passenger wheel well. I ziptied the end down under the front. This allows me to put a catch pan under it and predict where it'll go a little easier.