The Diesel Stop banner
1 - 1 of 1 Posts

·
Registered
Joined
·
2,330 Posts
When you did the ball joints, you would have had the axle shafts out. The passenger/right side shaft is the longer one and when reinstalling the shaft, it is very easy to knock the spring off the inner carrier seal. The only way to fix it, is to pull everything apart again, including the carrier, then replace the seal (or both).
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top