The Diesel Stop banner

Leveling kit help?

1905 Views 7 Replies 3 Participants Last post by  Vet4jdc
I have a 2010 f250 lariat that I have installed a rough country 2" leveling kit. I was the cast iron spacers. The back is 1" lower now. To level it out I need to remove the 2" factory blocks and add 3" ones. My question is would adding the f350 blocks(or ready lift 4" blocks) be better? Should put it around 1" in back.
1 - 4 of 8 Posts
Well for starters I don't want to purchase another leveling kit and get another alignment
I agree, just didn't know if being 1" higher in back would be as noticeable as 1" high in front. I had 3" blocks ordered but he ordered angled ones and I need the flat ones. He's 4x4 Shop is the one who recommended the 4" blocks, their supposed to be here Monday....i think I'm not gonna like it. Guess as of now I'll install them and if i don't like them, I'll but a 2.5" kit on front. Btw i do tow a pretty heavy boat so it bring higher in back is good for that lol
1 - 4 of 8 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.