[bugman]

A member on another forum was having a very low fuel pressure problem and he found that the filter wasn't completely seated in the housing. Possibly his first problem was with the fuel pump that he replaced but then compounded the problem down the road with other things that he did.

 

[bugman]

If the filter and lid are a Racor, and Ford there should be just a couple of plastic clips holding them together. But there are aftermarket filters that the lid is attached to it and you cannot remove it.

You should be able to just use it, but don't get rid of the old cap. I actually carry a spare cap with me along with a new filter and gasket.

Sent from my SM-A426U using Tapatalk