The Diesel Stop banner

mech water temp gauge install

1451 Views 3 Replies 3 Participants Last post by  Mach1
where is the best place to install a water temp sensor on a 99 f350sd..mechanical..
1 - 1 of 4 Posts
I use the 3/8"NPT fitting on the thermostat housing, myself..

The stock gauge tells nothing of degrees, just a range..Good move on installing a gauge, Bob Riley sells the coolant filters kit.
1 - 1 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.