The Diesel Stop banner
1 - 5 of 5 Posts

· Registered
Joined
·
124 Posts
Discussion Starter · #1 ·
I have 285/75/16 BFG MT tires, would they be to small if I put on a RSK? Also, for people who do the RSK, what do you do for the rear? Blocks?

Thanks!
 

· Registered
Joined
·
421 Posts
I don't think 285's would look too small after doing an RSK. I have 35's, and I like that look, but 285's aren't that much smaller.
When I did my RSK, it lifted the front about 3", which was slightly too much to level the truck. I'm lucky and have air bags on all four corners, so I just put 30psi in the rear bags to give me the stance I wanted. Others have installed bigger blocks, or installed an add-a-leaf.
 

· Registered
Joined
·
124 Posts
Discussion Starter · #3 ·
How big of blocks would I need for the rear if I did the RSK in front?
 

· Registered
Joined
·
1,085 Posts
f250 come with 2" blocks I think, and f350 comes with 3". You can add a 3" block to the f250, or 2" to the f350 to level it out.

Cant remeber the exact details above.. sorry. I do remember that the stock blocks between the f250 and f350 are definately different. So playing around with add in blocks and stock blocks, you should get the appropriate lift.
 

· Registered
Joined
·
421 Posts
The blocks on a 250 are 2", and on a 350 they're 4". If you get 3" out of the RSK like I did, you'd want to go another 1" to level it, or 2" to give it a slight rake. By adding a little air to my rear bags, I've given mine a 1" positive rake.
 
1 - 5 of 5 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top