The Diesel Stop banner

need help with setting up scanguage2 and boost

1960 Views 7 Replies 4 Participants Last post by  deliberate
I was wondering if someone could help me dial in my codes for my scanguageII to show the boost. I have a stock f350 psd 6.0 I live in detroit michigan. I tried putting the boost code in. I am sure i have the altatuide formulla wrong or something. It shows betwenn 2-12 psi I also have the ect and trans programmed into it. them seem to be working good. Also is the factory coolant temp good or do i need a new code for that? and is their anything else i chould progam into it to keep an eye out for? Thanks for any help anyone can provide.
1 - 2 of 8 Posts
I think he meant the factory "scangauge2" setting for the coolant temp....
or at least that is what I assumed he meant......
Yes, Thats what i ment is the factory scangauge2 water temp. Right now on my scan gauge i use coolant temp, oil temp, trans temp, and trying to get boost, but the boost cant be reading right. its showing i only have 2 to 12 psi depending on how i get into the throttle. unless i have a leak in my system. but the truck seems to be running good.
1 - 2 of 8 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.