[drdenny1]

Ok, I know it is and has been a problem for some Superduties. HARD STEERING WHILE STOPPED! I have had people say they either just changed P/S fluid with either reg. or synthetic fluid and that cured their problem, and those that replaced their P/S pumps with stock reman. I put an AGR Super Pump on yesterday and completly flushed the system including the cooler and hydroboost. Added RedLine synth fluid and it's better but not great. It's a 4X4 with 315's/35's with a 4" lift. I tow a 32' 5er and it can ba a bear to manuver sometimes. I have a friend that has a new AGR Steering gear for a good price. But wondering if I'll end up needing the Rock Ram too, another $600.00. Ouch. Anyone have any tales of their steering troubles?

Thanks,
Denis /ubbthreads/images/graemlins/tongue.gif

 

[05superdutyTJ]

well, you already know my answer.
-TOM

 

[coldair]

I just installed the ORU ram assist steering over the weekend and that is your answer. I got mine from Marty ( Overkill) at Truck Toyz he is a sponsor of this site and has been very helpful

 

[drdenny1]

How many $$$??? Happy to hear it cured your problem.

I should have checked with you first,Tom. You probably have what I need in your garage. /ubbthreads/images/graemlins/grin.gif

Denis

 

[ozhoo]

[ QUOTE ]
How many $$$???

[/ QUOTE ]

Ford Hydraulic Ram Assist

A man's really got to not like his steering box to part with that kinda bread.

O

 

[coldair]

[ QUOTE ]
[ QUOTE ]
How many $$$???

[/ QUOTE ]

Ford Hydraulic Ram Assist

A man's really got to not like his steering box to part with that kinda bread.

O

[/ QUOTE ]
Or not wanting to hear is 120 lb wife biacth about not being able to drive his truck and that it was a POS because she can't turn the wheels without it rolling

 

[drdenny1]

Ding,Ding,Ding, give the man a prize! This is where I got my pump and a buddy has the gear NIB. I'm getting it much cheaper, then the RAM. <font color="blue"> AGR Performance </font>

Denis /ubbthreads/images/graemlins/smokin.gif

 

[coldair]

I read several post complaining about AGR service /ubbthreads/images/graemlins/ooo.gif

 

[drdenny1]

uh oh /ubbthreads/images/graemlins/shocked.gif

 

[MarvinVR]

uh oh is right---just as I was about to say how nice their unit looked for only $289.

 

[coldair]

do a search on here for AGR or call Marty at Truck Toyz and ask him what he recommends

 

[WAMPAKU]

i did a lot of research before buying and asking questions. i always ask direct questions to the company asking what makes your better than the others, etc. i choose agr. i have always read on here that fellow people "heard" and did not "experience" the bad service from agr. so its all hear say. so i will let you know how the rock ram system goes in and also the dynatrac system goes. this will all be from the horses mouth. /ubbthreads/images/graemlins/eek.gif /ubbthreads/images/graemlins/grin.gif /ubbthreads/images/graemlins/smokin.gif

 

[drdenny1]

I spoke with Mark at great lengths today. About the pump,gear and the ram, ball joints, tierod ends and everything in between. That has been the third time in the past 2 months that I have called. And this time I went to tech support and was transfered to the receptionist and after waiting just a couple of minutes I had a live body that seemed to know what they were talking about, he cared about my concerns and was not rushing me. I also told him there were a couple of folks that didn't have good thoughts about their support. He assured me him and his colleagues go out of there way to bring solid information and support. So as Wampaku said. I have started with their product and support and will continue with it. And keep you posted. Next is the gear... /ubbthreads/images/graemlins/smokin.gif

Denis /ubbthreads/images/graemlins/cool.gif

 

[WAMPAKU]

[ QUOTE ]
I spoke with Mark at great lengths today. About the pump,gear and the ram, ball joints, tierod ends and everything in between. That has been the third time in the past 2 months that I have called. And this time I went to tech support and was transfered to the receptionist and after waiting just a couple of minutes I had a live body that seemed to know what they were talking about, he cared about my concerns and was not rushing me. I also told him there were a couple of folks that didn't have good thoughts about their support. He assured me him and his colleagues go out of there way to bring solid information and support. So as Wampaku said. I have started with their product and support and will continue with it. And keep you posted. Next is the gear... /ubbthreads/images/graemlins/smokin.gif

Denis /ubbthreads/images/graemlins/cool.gif

[/ QUOTE ]

/ubbthreads/images/graemlins/grin.gif /ubbthreads/images/graemlins/cool.gif