Long story short....my truck (2000 F350 6 spd) was vandalized while in posession of a towing company. Most of it was stupid stuff fuses removed or blown that I have corrected. The problem I am down to now is the lowlifes cut the connector off that went to the brake switch. So I have five wires cut off and no connector to the switch. Needless to say they will pay dearly for this however right now I need to get the brake lights and cruise working again. I have found connectors that I can put individually on each of the five terminals on the switch. I have them spliced into the harness. Does anyone have a manual with wiring diagrams that would give the colors of the wires and the sequence they are to be in the connector going to the switch? Any help would be appreciated.
