no oil pressure

1345 Views 7 Replies 4 Participants Last post by j criss, Apr 6, 2009

j criss

Discussion Starter · Mar 30, 2009

Hi first time writer i have a 2000 EX and had to repo from some people that dump dirt in the oil removed the valve cover on the pass sire and vaccumed out all the rocks drained the oil and poured diesel down to flush let dry also found ipr to be stuck pulled apart and cleaned got oil pressure but no start then pulled hpop and found rocks in the screen in the resivor cleaned out everything got new pump and ipr installed and started right up drove 60 miles parked it next morning started right up drove a mile and died crancking no oil pressure wts light is coming on tach is moving any suggestions thanks josh

Save

1 - 2 of 8 Posts

Bill1013

· #3 · Mar 30, 2009

X2 WOW Those people were pissed at you. Maybe you aught to name them and what city there in, so someone else don't get stuck with those dead beats.

Ain't no way you could have flushed all the dirt out of the oil pan. bet there is still an inch of mud in there yet. As klhansen said that engine is toast, without a complete tear down.
Sure sorry to hear about that.:icon_mad: :icon_mad: :icon_mad:

Save

Bill1013

· #6 · Apr 4, 2009

The low pressure oil pump is a gerotor pump a virtual rock crusher. The rocks sure didn't go thru there, they had to be poured into the oilfill neck. Look at page's 40 - 41 for the lube system route. Takes awhile to load but very informative.
http://www.forddoctorsdts.com/publi...49873DITDirectInjectionTurbochargedDiesel.pdf

Save

1 - 2 of 8 Posts

This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.

Top Contributors this Month