[2hi4a2x]

I know I've scanned through countless forums and topics. Called dealers, to no avail. I have an early 99 F250, edge evolution, stock motor. I got home last week and as soon as I shifted it into park it died and won't start. I have power checked all the fuses, ohm metered them also. Swapped relays, even borrowed a pcm that is a known good one. still nothing. Scanner will not communicate with the truck, no communication. It is a good scanner, that works with everything. No wts light, no oil pressure movement, no tach movement, and no check engine light. Any help would be greatly appreciated.

 

[yan7gin]

are you sure that the fuse 22 is good? I would unplug the fuel bowl heater and replace the fuse 22. also edge back to stock amd out

 

[2hi4a2x]

Edge will not do anything, error 150 no communication. I unplugged the heater and checked the fuse half a dozen times. My buddy with a dealer in Spokane is stumped as well.