[AggieDiesel01]

Ok, I got kicked off the search function on this site so I'll just ask the question I was searching for. I'm getting ready to reassemble my oil cooler and thought I remembered reading that the orings need to be lubed with something other than engine oil or grease. I think I remember vasoline mentioned or maybe silicone. Does anyone have any advice one way or the other? Thanks.....

 

[cdnsarguy]

Either one is fine which ever you have available..........

 

[dreamachinef250]

Hey Aggie,

Here is a link to my photo gallery, showing some pics. of when I put my oil cooler back together, might help some.

http://photos.thedieselstop.com/showgall...8556&stype=

Thanks,

Bill.

 

[AggieDiesel01]

Thanks for the info. It's finally done we'll see in the morning if there are any leaks. FYI you can R&R the oil cooler on a '91 without removing the power steering pump. I did unbolt the driver's side engine mount and jack the engine up. It's really not too bad a job, other than dealing with all the liquids........