The Diesel Stop banner

oil for twin turbos

749 Views 3 Replies 2 Participants Last post by  blaster1288
I am working on putting twin turbos on my '94 the turbos are an H2e and a S400. If I would put a Y in where the stock turbo oil line is would that pump enough oil for both turbos? If not where is a good location to get oil for the second turbo? Also for the oil return line from the second turbo I was just going to make up some kind of fitting or something and have it dump into the passengers valve cover, if you have a better or any input at all I'd appreciate it I'm just kind of making this hole thing up as I go.
1 - 2 of 4 Posts
Yea I had thought about that but it'll depend on how the turbo gets mounted I'm not sure if it will be high enough to drain over the valve cover or not. Any ideas on how to get the oil to the turbo?
1 - 2 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.