OTW Back-flush

1281 Views 5 Replies 4 Participants Last post by woodnthings8, Aug 27, 2011

Powerstroke Novice

Discussion Starter · Aug 24, 2011

Does anybody have any suggestions on back flushing my OTW portion of my radiator? I know some have said they have just used clean ATF fluid, a friend suggested using mineral spirits to clean up the gunk and help clear it out of there. I know that stuff is flammable and I would have to flush it back out with ATF fluid again. Any other product suggestions? Thanks

Save

1 - 1 of 6 Posts

redcell6613

· #2 · Aug 25, 2011

I just shot some compressed air through my lines....made sure I stayed under 20 psi.

2002 F350 Lariat LE Dually 4x4 Crew Cab 7.3L, 4.10 gears, GTP38-R, Stage 1's, Custom Tunes, MBRP exhaust w/ stacks, 11 ISSPRO gauges, F-650 lower dash, Oil / Coolant / Tranny bypass filters, S&B Intake, Marinco Mod, Custom hydroboost remote filter / reservoir system, HPX, FRX, Bilsteins and Mag-hytec Rear / Front Diff Covers, 6.0L trans cooler / power steering cooler, Pioneer touchscreen with Alpine speakers all the way around.

2005 Ford Excursion 4x4 Eddie Bauer Edition
6.0 Liter: EGR Delete, S&B Intake, Sinister Intake Elbow and IC Pipes, Gryphon FICM Tuner, X4 with Gearhead Tunes, Edge CTS Monitor, MBRP Exhaust, Bilstein Shocks and Stabilizer, ARP Head Studs, MBRP Exhaust

2015 Jeep Rubicon Unlimited: 3.5 Inch AEV Lift Kit, Fox Racing Remote Reservoir Adjustable Shocks, Fox Steering Stabilizers, AEV Rear and Front Bumpers, Prodigy Performance Stage 2 Turbo Charger and Injectors, Prodigy Tunes, AEV Wheels, Mickey Thompson MTX 35" Tires, Terraflex Bumps.

Save

1 - 1 of 6 Posts

This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.

Top Contributors this Month