
Hey everybody. I have a problem with my 96 psd thats been happening for quite a while but now its a major problem. What happens is the truck will just kill, the motor that is, when driving around! It used to happen once every month or so and I could live with that but last night it killed 4 times trying to get home! Heres the scenario: Driving down highway motor kills,(it used to kick back on some times),
When eng kills still have power and lights etc, I keep rolling down the hwy Turn ign switch off for a few seconds which locks the steering (rather unsafe @ 80mph:nono

, Turn back on and this used to restart, But wasnt working yesterday. What I have to end up doing is put in neutral, push in clutch, turn ign off then on after delay then restart, but that doesnt always work on the first try :icon_mad:. I am doing this in traffic trying to cross lanes and roll down the shoulder untill being able to re-start,Remember I also am loosing power steering and brakes which is just fantastic when im pulling a skidsteer or tractor!
Heres what I have tried to do: Checked all battery connections, checked and wiggled all fuses, checked and wiggled wiring(especially to cps), Cant read any engine codes. Im lost and very angry I want to destroy the truck:icon_mad:!! Heres what im wondering... Could my cps be faulty? I have a new one im going to install. What about the exh back pressure sensor?(I unpluged and crossed terminals and that kills truck when its running). The same goes for icp sensor but I replaced not too long ago. In conclusion I cant figure it out and am very frustrated and ready to pull my hair out!! Any suggestions please!!! Thank you for reading.