[TexasTruck]

This past weekend my pyro went crazy. At idle the needle was steady, but when I took-off the needle would vibrate fast. When I leveled off the needle would stablize.

Bad gauge?
I hope the turbo didn't eat the probe!!!!!!

Any help would be greatly appreciated.

 

[Steve Campbell]

I could be wrong but check your ground. /ubbthreads/images/graemlins/shrug.gif If it's not your ground make sure that you pyro lead hasn't rubbed against something sharp and making a ground. /ubbthreads/images/graemlins/shrug.gif

 

[Down South]

If it's still working at all the probe should be good. I go with the bad ground idea.

 

[TexasTruck]

Thanks for the feedback. I'll trace the wire route for possible shorts. Oddly enough it's working again - steady needle.

Scott

 

[Steve Campbell]

Makes me believe even more its a ground or short on the pyro lead problem.