The Diesel Stop banner

Radio Wont Work when Truck running

1230 Views 4 Replies 2 Participants Last post by  ckjneil
Hey Guys, i am going to go out on a limb here and hope there are some people running 2m radios in there trucks, I just got a radio for my truck and it works fine until i turn the ignition on. as soon as it turns on i lose any signal i had and all i get is static. does anyone know what i need to do to fix this ?
Neil hamilton
1 - 2 of 5 Posts
i would look at all the connections for the radio . make sure theres no bare connections, it sounds like you're getting background noise ,maybe from the alt. that would be where i would start. easiest first.
does it happen in other vehicles or just you'res ? if it's just you're vehicle then you have to start checking things out , like does it matter if the truck radio is on or off , check batteries to see if connections are tight ,alt, anything that is electrical that is on when the truck is running . good luck .
1 - 2 of 5 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.