[robman7835]

Does anyone else with a retro solutions kit in their fog lights on a relay harness have a loud clicking in the cab when switching the fogs off? ( using the switch or using high beams).

Since day one I have had a very loud clicking like the the relay switching off, but it's way louder then it even was with the factory halogens. I haven't had any issues with the system but it still drives me crazy.

I can't imagine its causing harm because the power draw is now coming directly from the battery. Is the lack of draw causing the relay to react differently? My switched power for the relay is drawing from the passenger side fog if that helps.

Anyone with a kit in the fogs feel free to chime in.

Thanks
Rob

 

[lnfidel]

Why not contact retro solutions, they seem stand up and will probably answer your questions. Just a thought.

 

[robman7835]

Considering it's vehicle specific I figured I would ask people that have that experience first. I was also hoping Todd would chime in here if he had any knowledge of this problem .

 

[robman7835]

Bump for an answer... I know a bunch of you guys are running this kit

 

[robman7835]

Bump this... I know someone else is running this kit in their fogs

 

[consolidated]

I have their 3000K 35W capped kit, it's a soft click when turned on or off, barely audible even with the motor off.

For those considering yellow fogs, these lamps are super bright. I had another vendors 3000K fogs in my Tundra and they were noticeable but the light on the road still looked white. With the RS kit my entire world turns yellow, it's crazy bright but also easy on the eyes. They're attention getters for better or worse.

 

[N1NCZ]

I also have the 3000K capped fogs, but am not running a relay kit with it, only have relay kit with the headlights so I can't help.