Return line kit / Fuel Tank pickup tube /Fuel tank filler tube

3941 Views 11 Replies 6 Participants Last post by jmadigan, Apr 26, 2016

Chris90F250Diesel4x4

Discussion Starter · Apr 14, 2016

1. Have determined that I am getting air intrusion overnight due to the return lines and want to get a rebuild kit. Is this one I found on Amazon a good choice for my 90 F250 7.3 ?
Delphi 7135-264 Fuel Injector Installation Kit $32.78

2. When running on the rear tank my truck stalls out if I let the tank get below 1/2 tank. Am I correct to assume this means there is a hole in the fuel pickup tube that lets air in when I get down to 1/2 tank? What is the part called that I need to replace? Is it called the "Fuel Sender"?

3. When filling the rear tank of my truck with diesel the gas pump keeps shutting off as the fuel backs up as if it was full even though the tank is only at 3/4. I can get the tank full but it takes a long time of slowly filling. Is this a problem with the vent tube? Possible to replace just the vent tube or best to just buy a whole new filler tube for the tank?
Thanks,
Chris

Save

1 - 3 of 12 Posts

Chris90F250Diesel4x4

Discussion Starter · #6 · Apr 26, 2016

Thanks everyone for the info!
Thanks Bill for the pickup screen eBay link. I will order that from eBay as well as get the return line kit from Amazon or Rock Auto.
Question Bill: I looked up Hutch Mod but along with it found info on the Harpoon Mod. I think it is the Harpoon Mod you are talking about to help with the slow filling at the gas station issue?
The Hutch Mod looks to be something different and more involved and I'm not sure of the purpose but am I correct that the Harpoon Mod is what I would do to help with the slow filling at the gas station?
Chris

Save

Chris90F250Diesel4x4

Discussion Starter · #10 · Apr 26, 2016

THANKS!

Save

1 - 3 of 12 Posts

This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.

Top Contributors this Month