I know it's just an old truck, but i need to keep it for a while longer, and I'd like to keep it looking good. Does anyone make patch panels forr the wheel openings, or do I have to find a whole bedside?
Replaced the fuse I blew, dash lights came back cab lights came back mirror lights came back. The amber marker lights under the headlights, and tail lights (just the running ones the blinkers and brake lights work) don't work. What went bad? What do I replace ?
Anyone try the Kendall 15w40 DXA Ti oil in any powerstrokes? I did some searching but didn't come up with too much. It's made by same people that make Motorcraft (ConocoPhillips). The Kendall is a synthetic blend and I can get 4 gallons for $60. Just seeing if anyone has run it.
I am curious, situation- vehicle on ground, engine off and in park,when in 2h, when I manually (by hand) turn the front drive shaft from the transfer case to front axle (Spicer 50). Should the right(passenger) ujoint turn and left (driver) stay locked up (not turn)?
Does anyone know if clearing the DTC's also resets the monitors back to where I have to perform the drive cycle all over again? It wont pass smog now with the P1000 and P0541. I've performed the Ford drive cycle several times and cannot get rid of the two codes. I befieve the p0541 is a soft...
Anyone know a good mechanic (for a '02 F350, SRW, 7.3 with 180K) in the Baton Rouge area?
I am the original owner of this truck and have done all the oil changes and fuel filter maintenance myself. Had the transmission oil changed a couple of times at dealer. Other than that it has original...