The Diesel Stop banner

Stalling With Dp-Tuner

1781 Views 8 Replies 7 Participants Last post by  artherd
I have a 2002 7.3 all stock except for Dp-Tuner. The other day I pulled a boat to the river and it did fine all of the way there. When I backed the trailer down the ramp I put the truck in park, but hit the DP switch and the truck stalled and shut off. So I unplugged the switch and pluggged it in. So on the way home it still didn't act right. The truck was stalling every time when it shifted from 1st to 2nd. It was almost like a studder. When I got home it barely had enough power to pull up a steep drive-way. I don't think it's a loose connection because I moved the switch around checking for a loose wire. Anybody have any idea what it could be?
1 - 1 of 9 Posts
First of all, why are you running a chip on a stock truck? You really should have gauges at the minimum, and if you had the gauges you would probably want a better exhaust and intake to keep EGT temps down. Okay done preaching,
Do you have a No Start position on the chip? Is the newer version or older? Do you have the updated shielded cord installed?

[/ QUOTE ]

How do you know he doesn't have any guages?
1 - 1 of 9 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.