tieing into fuel system of 7.3 idi NA

1384 Views 4 Replies 3 Participants Last post by 350 long rod, Apr 29, 2006

nubiecanobie

Discussion Starter · Apr 27, 2006

I am planning the conversion of my 88 7.3 IDI NA to WVO soon. The stock mechanical lift pump feeds the fuel filter/separator before going to the IP. The fuel filter is under pressure from the lift pump. Where should I tie in with the 3 way valve? I would like not to run veg through the diesel fuel filter. I'd like to use the mech lift pump also for veg if possible and not add an elec pump.

Save

1 - 2 of 5 Posts

nubiecanobie

Discussion Starter · #3 · Apr 28, 2006

Thanks for the link. How did you plumb the stock lift pump?

[ QUOTE ]
Look at the link I use the diagram 4 system sort of I return to tanks with a bypass for purge to return veggi to veg tank Diagrams with HIH for heat

[/ QUOTE ]

Save

1 - 2 of 5 Posts

This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.

Top Contributors this Month