The Diesel Stop banner

1 - 2 of 2 Posts

·
Premium Member
Joined
·
49 Posts
Discussion Starter #1
I have a old 01 350 had a few problems lately but at the moment I keep getting code 123 and that code says I have a short to ground on my high current side of zTPS all but tearing my dash out so please fellas any suggestions diagrams on the 01 I have yet to find the correct 104 pin plug diagram I find it seems hundreds but none match my truck so if anyone has anything or know where I can get a little help in the right direction would be much appreciated thank you
 

·
Banned
Joined
·
16 Posts
Hi all, so I have a 95 motor in my 91 chassis, since the 91 has a 3 wire TPS and the 95 has the 4 wire VTPS I need to rewire it to work properly and can't find any reliable info on this. I have a megasquirt pnp2 to take advantage of the VTPS so it will work. I know there is a way to get it with the stock wiring and it can work since I had been doing that with the 97 motor I put in it but lost the diagram and info I had come up with.
 
1 - 2 of 2 Posts
Top