Trailer Lights

876 Views 1 Reply 2 Participants Last post by PreservedSwine, May 31, 2005

hottip

Discussion Starter · May 31, 2005

OK, So I'm getting my boat out of the garage and hook up the trailer. The lights are not working, so I replace the bulbs, no help there, no voltage at light sockets. Go to the connection at the rear bumper and no voltage at the connector. My brake lights and running lights work on the truck but can't find if there is a fuse for the trailer lights. I would think that if everything is normal on the truck then I should have voltage to the trailer connector at the rear bumper. Am I missing something here? /ubbthreads/images/graemlins/shrug.gif

See less See more

Save

1 - 1 of 2 Posts

PreservedSwine

· #2 · May 31, 2005

Check your fuse panel.
On my 2003, had a short, blew the fuse. Trailor lights in/op, truck lights fine. Replaced the fuse, good to go. (After locating some rubbed wire exposing copper)

Save

1 - 1 of 2 Posts

This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.

Top Contributors this Month