The Diesel Stop banner
1 - 5 of 5 Posts

· Registered
Joined
·
14 Posts
Discussion Starter · #1 ·
I am going to change my fluid and filter in my e40d soon and also put a cooler on it. I do a fir amount of towing, nothing really heavy, 1-2 thousand lbs. So what tranny fluid should I use and what all do i need to put a cooler on it? Is there a kit? I didnt some searching and didnt find exactly what I was looking for. Thanks
 

· Registered
Joined
·
3,145 Posts
Teh best ones I have used are the Tru-cool 4590 kit, there are pictures on my pics for install, it will install in the usual location adn use your stock lines, plus you can add PS cooler if you want. I would use a syn fluid.
 

· Registered
Joined
·
8 Posts
mercron v, I like Moble one, The best cooler for the right price is the 99 ford take off cooler place it in the front bumper. It will look like ford did it, and if you want to up grade with a intercooler you wont have to move it later. You can call Brians truck shop (bts) to back up me up
 

· Super Moderator
Joined
·
9,150 Posts
I doubt Brian would back you up on that choice. That cooler is one of the smallest ones Ford made and performs poorly. What you really need is a cooler from a 6.0L truck. It is MUCH larger.
 

· Premium Member
Joined
·
1,995 Posts
I believe montster meant the V10 transmission cooler from a Super Duty.

Cheers from Claremore, OK! :)
Dave
 
1 - 5 of 5 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top