Hey check the transmission shop in Hampstead NC it is right past the DMV office. He is good he has worked on a few of my trucks. I lived up there for 20 years tell him Tex sent you. I use to hunt with his son in the gamelands.
[TRANS] P0766 & P2703
Wow, been awhile since I've been back here! My non-studded baby is now over 240k with a Tuner, EGR Delete, and some new injectors / IPR.
Had these codes pop up earlier in the week after the truck did a hard shift and tow / haul started flashing which prompted the scan. After letting it sit overnight, drove fine the next day, and then it came back with another hard shift. Did a trans pan drain and fill, approx 9qts. This seemed to help it for a few days and then it came back. Took it to a local diesel shop (Triple C, Jacksonville, NC). Owner/Tech. there test drove it and scanned it getting the same codes. He told me that it is a $100 bushing that is causing the problem, but he won't replace it without doing a full rebuild.
Also to be noted, truck will not go into overdrive. Monitoring it as I drive it will sometimes skip 4th and go right into 5th. I am guessing I have low pressure going to the TC as it is now bucking in reverse.
Kind of in a pinch between a rock and a hard place. Been trying to sell the truck off, but don't want to drop $3k on a rebuild. How should I proceed if I am to keep the truck for a little while longer without doing more damage? Get a rebuild? Replace the bushing? Do a trans fluid flush? New tranny? Donor tranny?
Not sure if anyone has a program (such as FORScan that I use) that can open and read .fsl files. I can post a few if someone does.
Had these codes pop up earlier in the week after the truck did a hard shift and tow / haul started flashing which prompted the scan. After letting it sit overnight, drove fine the next day, and then it came back with another hard shift. Did a trans pan drain and fill, approx 9qts. This seemed to help it for a few days and then it came back. Took it to a local diesel shop (Triple C, Jacksonville, NC). Owner/Tech. there test drove it and scanned it getting the same codes. He told me that it is a $100 bushing that is causing the problem, but he won't replace it without doing a full rebuild.
Also to be noted, truck will not go into overdrive. Monitoring it as I drive it will sometimes skip 4th and go right into 5th. I am guessing I have low pressure going to the TC as it is now bucking in reverse.
Kind of in a pinch between a rock and a hard place. Been trying to sell the truck off, but don't want to drop $3k on a rebuild. How should I proceed if I am to keep the truck for a little while longer without doing more damage? Get a rebuild? Replace the bushing? Do a trans fluid flush? New tranny? Donor tranny?
Not sure if anyone has a program (such as FORScan that I use) that can open and read .fsl files. I can post a few if someone does.
1 - 2 of 10 Posts
I was with 2/2 & 3/2 weapons company I lived the grunt life in waepons company.
1 - 2 of 10 Posts
- This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
The Diesel Stop
A forum community dedicated to all Ford Diesel owners and enthusiasts. Come join the discussion about PowerStrokes, performance, modifications, troubleshooting, towing capacity, maintenance, and more!
Full Forum Listing
