[patrickrc51]

Where do I install the trans oil temp sensor? I was told there is a spot already for it.

 

[scoutguy66]

I should flame you and tell you to do a search on it, but it was easy so here you go, this should help...Gauge Installations at DieselManor- 2003-2007 6.0L Powerstroke

 

[patrickrc51]

Why would you wanna Flame me? I'm doing the good stuff to my truck.. haha

 

[scoutguy66]

Why would you wanna Flame me? I'm doing the good stuff to my truck.. haha

Some of these grumpy old guys(your only as old as you feel:thumbsup don't want to retype what they talked about 5 years ago so they want you to work for it. It does clog up the forum when you have 73 posts of people looking for trans temp sensor locations though...


Can't get in the way of the good stuff, I just did a 3 guage install on my truck.. haha

 

[patrickrc51]

I just added a 4 pod pillar. Boost, Pyro, Trans temp, Coolant Temp.
Looks [email protected]@...

 

[scoutguy66]

Yeah, Just after I put the 3 guage pod in I got to thinking about all the things I could do with a fourth pod... oh well.

 

[patrickrc51]

on avg. What does your Tranny gauge read?

 

[601HP]

My temp while driving unloaded and not towing is typically around: AMBIENT TEMP plus 100 DEGREES. This is approximate.

David

 

[Mark Kovalsky]

on avg. What does your Tranny gauge read?

Your TorqShift trans will run different temps than a 4R100. The TorqShift has a thermostat with a nominal temperature of 165F. The 4R100 does not have a thermostat, so it is more closely linked to ambient temperature.

 

[patrickrc51]

Thank you very much... Mine has been at 165 and no higher... Was just wondering...
Thanks