The Diesel Stop banner
1 - 2 of 2 Posts

·
Registered
Joined
·
2 Posts
Hello new to the site. And I bought a 03 f250 6.0 previous owner said they were driving and the truck lost power and died. I changed the pressure sensor on the hpop and still will not start I tore it down and removed the hpop and there is no metal visable so my question is can they check the oil pump out of the truck??
 

·
Registered
Joined
·
2 Posts
I've been told when the pump fails it puts metal through the pressure sensor screen and thr screen was in great shape.
I have changed the following. Ficm, fuel pump, filters, ipr valve.
Any ideas on loss of power and then no start problem I'm afraid it may be a long list lol
 
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top